Prevention of wear and tear on industrial chains

- Jul 02, 2018-

The wear and tear phenomenon of industrial chain is very common. How to maintain the chain and prevent the wear and tear?

1. When changing speed, please try to keep the vertical degree of the industrial chain between the big tooth disk and the flywheel;

2. Take the road condition into consideration in advance when changing the speed (for example, when climbing the slope, advance the gear to avoid changing gears, excessive force is attached to the industrial chain;

3. The chain shall be cleaned and lubricated regularly. After the lubricating oil is added, it shall wait for about 30 minutes to several hours of infiltration.

4. In addition, rub the surface of the chain until it feels almost empty of oil. The better lubrication effect can be achieved by penetrating into the inner part of the chain shaft.