Hyundai R290 Idler

Hyundai R290 Idler

Material: 35MnB Hardness of quenching HRC 48-56 Warranty Period: 12 months Application: R290 R290LC R290LC- 3 R290LC-5 R290LC-7A 0285 UP R290LC-7C R290LC-7H R290LC-7L R290LC-7R R290LC-9 R290LCN-7 R320 -3 R320LC R320LC-3 R320NLC-3 00170 UP R320NLC-3 UP TO 00170 R350 R350LC R360LC 3 00020 TO 0180...
Chat Now

Product Details

Material:

35MnB

Hardness of quenching

HRC 48-56

Warranty Period:

12 months

Application:

R290    R290LC    R290LC- 3    R290LC-5    

R290LC-7A 0285 UP    R290LC-7C    R290LC-7H    R290LC-7L    

R290LC-7R    R290LC-9    R290LCN-7    R320 -3    

R320LC    R320LC-3    R320NLC-3 00170 UP    R320NLC-3 UP TO 00170    

R350    R350LC    R360LC 3 00020 TO 0180    R360LC 3 0181 UP    

R360LC 3 UP TO 00019    


Method of replacing excavator steering wheel:

1, remove the excavator's tracks first.

Remove a single valve in the butter nozzle area, release the butter inside, push the guide wheel in with a bucket to make the track looser and better. Remove the track pin if the excavator is below 150. If it is above 150, hook the track with a bucket. Remember to remove the single valve, otherwise It is not easy to remove the caterpillar, it is even worse.

2, install the guide wheel.

The guide wheel installation is the same as the general wheel installation method. Use a jack to support the excavator, then screw the screw with a screwdriver, remove, put the new wheel on, grease, that is to complete the installation.


Inquiry